using emcp plugin

[handsunc]

Hi Can you help me bypass the firewall I think is blocking my emcp connection, I got this message:

EMCP Gateway hosting diagnostics
Checked at (UTC): 2026-11-13T13:32:43.273Z
Result: unavailable
Reason: token_endpoint_unreachable
HTTP status: 500
Latency: 2348 ms
User-Agent: EMCP-Gateway/1.0 (+https://emcptools.com/docs/connecting/gateway-network/)
Configured outbound IPv4 (not measured per request): 51.161.91.207
Gateway identity: https://emcptools.com/docs/connecting/gateway-network/

Request 1: POST https://lighthouseinsuranceboutique.com/wp-json/emcp-tools/oauth/v1/token
Started at (UTC): 2026-11-13T13:32:40.941Z
Request ID: f1eb62ff-d2e5-4b2d-a2d7-28cb9f88b4ae
HTTP status: 500
Cloudflare Ray ID: a59e24d41be7aca2-YYZ
Browser challenge detected: no

Please check edge firewall/bot-protection events and origin access logs at the request times above.
If blocked, identify the rule and advise on a narrowly scoped exception for the EMCP endpoints.
This report excludes credentials, cookies, request bodies, and response bodies.

[AITpro Admin]

I don’t think BPS Pro is blocking EMCP, but to eliminate BPS Pro do the troubleshooting steps below. If the troubleshooting steps below work then let me know that. If the troubleshooting steps make no difference then most likely something is not configured correctly or something else the site has installed is causing the problem. Delete all cache: Browser, Plugin cache and Cloudflare cache and test again.

1. On the Security Modes page, click the Root Folder BulletProof Mode Deactivate button.
2. On the Security Modes page, click the wp-admin Folder BulletProof Mode Deactivate button.works.
3. On the Security Modes page, click the Plugin Firewall BulletProof Mode Deactivate button.

The EMCP tools link you posted is referring to Kinsta’s Bot Protection and/or Kinsta’s Vulnerability protection plugin. Are you using either of these?

[Author]

Posts